Chat with us, powered by LiveChat

electron fluoride solution cas 406-78-0

Chemical Name: Electron Fluoride Solution

CAS No.: 406-78-0

Appearance: Colorless Clear Liquid

分类:

描述

Electron Fluoride Solution Quick Details

Chemical Name: Electron Fluoride Solution

CAS No.: 406-78-0

Appearance: Colorless Clear Liquid


Electron Fluoride Solution Series

1.Fluorocarbon cooling medium

Fluorocarbon cooling medium Description

  • Fluorocarbon-cooled working fluids are high-permeability, high- permeability perfluorinated liquid compounds with high dielectric constant, ideal chemical inertness, excellent thermal conductivity, and good system matching compatibility. This series of products are widely used in various temperature-controlled heat dissipation systems. This product is widely used in immersed phase liquid cooling of data center servers, and is also widely used in various stages of semiconductor manufacturing to cool and cool (such as wafer manufacturing coolers, dry Etching and tempering upper and lower electrodes for temperature control, wafer pattern preparation, exposure table, and wafer test system.

  • High and low temperature cooling control, etc.; high-speed train power supply inverter, lithium battery power car cooling temperature control, nuclear power, UHV power grid and military radar system, wind turbine internal heating components cooling system coolingand cooling.

Fluorocarbon cooling medium Features

  • Ideal chemical inertness, can be widely used in various temperature control heat dissipationoccasions.

  • Single-phase cooling has a lower gas pressure, which can reduce the sealing requirements of the equipment and the maintenance in the later maintenance, and reduce thecost.

  • Non-dangerous goods or not explosion, no flashpoint

  • Electrical insulation is good, with a very high breakdown voltage greater than50KV.

  • A dielectric constant below 2 does not deplete data in data center applications.

  • Good fluidity, low viscosity compared to clean water; goodheat dissipation in temperature controlsystems.

  • Non-toxic, harmless andnon-irritating

Fluorocarbon cooling medium Typical Properties

Dielectric constant 1.85
Breakdown voltage Content measurement) 48KV
Surface Tension 16.7mN/m
Boiling point 110~115°C
Density 1.812g/ml
Volume resistivity 1.4×1014
Coefficient of expansion 0.0015
Saturated water content 23.4ppm
Critical temperature ——
PH value ——
Flash point N/A
Burning process N/A
ODP 0
GWP Low
Specific heat (25 ° C) 1.431J/g°C
Thermal Conductivity 0.0831
Heat of vaporization 136J/g°C
Viscosity 0.87 mPa.s


2. HH-705

HH-705 Description

  • Cooling Medium HH-705 is a highly stable fluoroether liquid with high dielectric strength, ideal chemical inertness, excellent heat transfer properties and good system compatibility. This product is widely used in various temperature control cooling systems, such as heat pipe cooling system (soaking plate, inflation plate and various types of heat pipe radiators), lithium battery power vehicles (motor, battery box, etc.) Cooling and cooling in all aspects of production and manufacturing (such as wafer manufacturing cooler, dry etching upper and lower electrode cooling temperature control, chip pattern preparation exposure machine, chip test system high and low temperature cooling control, chip sorting equipment, etc.), military Cooling and cooling of the heat dissipation system of the internal heating components of the radar system and the wind power generator.

HH-705 Features

  • It has good chemical inertness, it can be widely used in various temperature controlled heat dissipation applications.

  • Non-dangerous goods, no explosion, no flash point

  • Good electrical insulation, with a very high breakdown voltage greater than40KV。

  • Low viscosity, good heat dissipation in the temperature control system.

  • Non-toxic, harmless and non-irritating

  • Environmentally friendly, with 0 ODP values and very low GWP value products

HH-705 Typical Properties

Name HH-705 Dielectric constant 5.82
Dielectric strength >40KV Surface Tension 1.154mN/m
Boiling point 73°C density 1.52g/ml
Specific heat capacity 137.5J/g°C Vaporization heat 132.7J/g°C
Saturated water content 647ppm Viscosity 0.61 CPS
PH Not applicable Flash point N/A
Combustion process; N/A ODP 0
GWP 33 Vapor Pressure 20℃ 13kpa


3. Fluorocarbonalkanesolvent

Fluorocarbonalkanesolvent Usage

  • Solvent:anti-fingerprintliquidandlubricantthinner

  • Cleaning:metaldegreasingcleaning,plasticcleaning,resincleaning,dust

  • removal

  • Heatmedium:secondaryrefrigerant,coldload

  • Usedtoreplace3MTMNovecTM, DupontTMVertrel®solvents

Fluorocarbonalkanesolvent Advantages

  • Colorless,odorless,notburning

  • Lowsurfacetension,lowviscosity,lowlatentheatofevaporation

  • Excellentheatresistance,chemicalresistanceandhydrolysisresistance

  • TheperformanceisclosesttoCFCsandtheODPvalueiszero

FluorocarbonalkanesolventTypical Properties

Boilingpoint 90-110℃
density 1.766(g/ml,25℃)
Viscosity 0.62(cst)
VaporPressure 6(KPa, 25℃)
Perfluoro-n-heptane ≈27%
Perfluoropropylcyclohexylether ≈6%
Perfluorobutylcyclopentylether ≈36%
Perfluoro-n-octane ≈23%
Perfluorocyclodecylether ≈1.5%
Moisture <50ppm


4. Hexafluoropropylenetrimer

HexafluoropropylenetrimerUsage

  • Solvent:lubricantdiluent

  • Cleaning:metaldegreasingcleaning,plasticcleaning,resincleaning,dustremoval

  • Syntheticsurfactantsandpolymers

  • Heatmedium:secondaryrefrigerant,carryingcold

  • Usedtoreplace3MTMNovecTM, DupontTMVertrel®solvents

Hexafluoropropylenetrimer Advantages

  • Colorless,odorless,notburning

  • Lowsurfacetension,lowviscosity,lowlatentheatofevaporation

  • Excellentheatresistance,chemicalresistanceandhydrolysisresistance

  • TheperformanceisclosesttoCFCsandtheODPvalueiszero

Hexafluoropropylenetrimer Typical Properties

Boilingpoint 108℃
density 1.75(g/ml,25℃)
Viscosity 0.68(cst)
VaporPressure 5.5(KPa,25℃)
SurfaceTension 13(dyn/cm)
content >99%

    立即联系!

    海航服务电话:0531-88032799
    工作时间:周一至周六8:30-17:45
    在线客服:您也可以通过右下角的在线客服工具获得更快捷的回复。

    返回顶部